k-teck-01

ACCESSORIES

!
K-TEK
K4NK

K4NK 4" COILED CABLE

  • Approximately 4 inches of coiled cable which will stretch to approximately 15 inches.  Neutrik Male to  K-TEK R/A Female
K-TEK
K6NN

K6NN COILED CABLE

  • Approximately 6 inches of coiled cable which will stretch to approximately 4 ft. with Neutrik male and female connectors.
K-TEK
K18NN

K18NN COILED CABLE

  • Approximately 1.5 ft. of coiled cable which will stretch to approximately 9 ft. with Neutrik male and female connectors.
K-TEK
K36NK

K36NK COILED CABLE

  • Approximately 3 ft. of coiled cable which will stretch to approximately 18 ft.  Neutrik male to K-tek R/A Female XLR.
K-TEK
KSPT

KSPT SHOE MOUNT PLATE

  • Shoe plate provides a flat surface for mounting accessories including audio receivers and recorders.
K-TEK
KSA

KSA Adapter

  • Shoe adapter adapts a camera shoe to 3/8x16 threaded stud.
K-TEK
KNS3

KNS3 NAUTILUS SHOCK MOUNT

In order to make it simple to use and universal, we decided that the mounting rings should be able to slide along a single rail. This allows the end user to position each mounting ring anywhere on the rail. This means that any size microphone, from a small Sanken CS-1e all the way up to the Sennheiser MKH8070 can be used with just this one mount. Another advantage to the sliding rail system is that for heavier microphones, additional mounting rings can be easily added to help support the weight. There are two tensions of mounting rings available at this time.

One of the biggest problems to solve was isolation in three dimensions (on an X, Y, and Z axis). The Nautilus (patent pending) has successfully achieved three dimensional isolation due to the fact that the microphone is suspended in the center of the mounting ring, allowing it to move in any direction no matter which way the microphone is oriented. This is critical when using microphones like the Schoeps modular series of microphones with a GVC swivel.

Since The Nautilus (patent pending) is so simple in its design, that means parts are easily replaceable. All the parts are made from extremely tough, high quality, proprietary materials. But, should something break or fail it is easy to replace any of the parts quickly and cheaply.