V-PLATE/ADAPTERS

!
IDX
P-V2

P-V2

ENDURA V-Mount Plate with 2 Pin D-Tap DC Out & Digi-View

The P-V2 V-Mount adaptor plate converts most cameras to a V-Mount battery interface. Multiple mounting holes fit virtually all professional video cameras as well as many manufacturers’ monitors, hard drives, test instruments and more. The P-V2 has a 2 pin D-Tap on the side for powering an on-board camera light or accessories. As part of IDX’s Dig-View feature, digital battery data from the ELITE, E-HL9, E-10 and E-7 can be transferred through the P-V2 to viewfinders of compatible cameras.

IDX
P-VS2

P-VS2

ENDURA V-Mount Plate w/2 Pin D-Tap DC Out & Digi-View & Syncron

The P-VS2 V-Mount adaptor plate is an enhanced version of the P-V2 that features Syncron--turning the on-board light on and off in sync with a camera’s record button. As part of IDX’s Digi-View feature, digital battery data from the ELITE, E-HL9, E-10, and E-7 can be transferred through the P-VS2 to a compatible cameras’ viewfinder.

IDX
P-V212

P-V212

ENDURA V-Mount Plate with Dual 2-Pin D-Tap DC Out and Digi-View

As a variation of the popular P-V2 Plate series, the P-V212 provides to the 12VDC output and includes dual D-Taps - one positioned on each side: one 2-Pin D-Tap for regulated 12VDC output and a second D-Tap for unregulated battery throughput (lights, HDD recorder, etc.).

IDX
P-V257

P-V257

ENDURA V-Mount Plate with Dual 2-Pin D-Tap DC Out and Digi-View

P-V257 converts 12V to 5V/7.3V and uses ENDURA batteries. Choose between the two voltages with a convenient power output switch located on the side below the D-Tap connector used for 5V/7.3V regulated power. Ancillary gear, such as lights, can be powered via the second unregulated 2-Pin D-Tap on the opposite side of the plate. its unregulated battery throughput voltage output can be as high as 16.8V with IDX Li-Ion batteries.

IDX
P-V284

P-V284

ENDURA V-Mount Plate with Dual 2-Pin D-Tap DC Outs and Digi-View

For operators of Sony's HVR series camcorders, the P-V284 V-Plate features dual 2-Pin D-Taps - one 2-Pin D-Tap serves as the 8.4V (regulated) connection; and a second 2-Pin D-Tap is included for optional accessory power - its unregulated battery throughput voltage output can be as high as 16.8V with IDX Li-Ion batteries.

IDX
A-E2DT-2

A-E2DT-2

V-Mount to V-Mount Camera Adaptor with 2 pin D-Tap DC Out

The A-E2DT-2 is a V-Mount to V-Mount plate with a 2 pin D-Tap connector. A-E2DT-2 will provide a D-Tap for broadcast cameras that do not have a D-tap DC output. This plate can also be used in conjunction with an ENDURA battery to power accessories via 2 pin D-Tap connector.

IDX
A-AB2E

A-AB2E

Adaptor Bracket to Fit ENDURA Batteries to a 3-Stud Mount

This adaptor locks onto 3-stud mounting plates as a temporary or transitional 3-stud converter to a V-Mount configuration. The flexibility of the converter allows ENDURA system batteries to be used on 3-stud mounting systems. Please note that when using the A-AB2E, the Digi-View function becomes disabled.

IDX
MD-NBV

MD-NBV

ENDURA V-Mount Plate with Multiple D-Taps

Designed to be sandwiched between a V-Mount camera and battery or mounted on a V-Dock, the MD-NBV, has five (5) D-Taps and allows you to power accessories such as onboard monitors, lights, wireless receivers, media recorders, signal converters, etc. Max draw from each D-Tap is 30W/2A (each D-Tap independently fused), and total Max draw is 120W/10A.

IDX
NBV-XLR

NBV-XLR

ENDURA V-Mount Plate with 4-Pin XLR Connector

Designed to mount on any V-Mount plate and accept power through an industry standard male 4-pin XLR. The NBV-XLR allows you to power your equipment off of a large 12V battery block or 12V AC power supply. A D-Tap allows you to power on-board accessories as well.

IDX
A-E2DT-2

A-E2DT-2

V-Mount to V-Mount Camera Adaptor with 2 Pin D-Tap DC out

The A-E2DT-2 is a V-Mount to V-Mount plate with a 2 pin D-Tap connector. A-E2DT-2 will provide a D-Tap for broadcast cameras that do not have a D-tap DC output. This plate can also be used in conjunction with an ENDURA battery to power accessories via 2 pin D-Tap connector.

IDX
ET-PV2BM

ET-PV2BM

V-Mount Adaptor Plate for Blackmagic Cinema camera

  • ET-PV2BM allows direct mounting of IDX ENDURA batteries and is designed to attached directly to the IDX A-CP(A) or any other mounting plates on industry standard rail systems.
IDX
A-CP(A)

A-CP(A)

Versatile Cheese Plate and Clamp

  • The A-CP(A) aluminum cheese plate and clamp allows to attach IDX V-Mount P-V2 series plates on rod system in variety of mounting positions. Compatible with P-V2, P-VS2, P-V257, P-V284, P-V212, A-E2EOSC and ET-PV2BM for powering various cameras on a rod system.
IDX
A-E2EOSC

A-E2EOSC

V-Mount Adaptor for Canon Cinema EOS Cameras C100/C300/C500

  • A-E2EOSC allows direct mounting of IDX ENDURA batteries and is designed to attached directly to IDX A-CP(A) or any other suitable mounting plates on industry standard rail systems.
IDX
TA-PV2J650

TA-PV2J650

V-Mount Adaptor for JVC GY-HM600/GY-HM650

  • TA-PV2J650 allows direct mounting of IDX ENDURA batteries and is designed to attached directly to the IDX A-CP(A) universal mounting plate, TA-CA2 series support accessories or any other mounting plates on industry standard rail systems.
IDX
TA-CA2

TA-CA2 (TA-CA214 and TA-CA238)

TA-CA2 (TA-CA214 and TA-CA238)

  • Versatile Camera Support Accessory