mathews-01

HARDWARE

!
MATTHEWS
429066

429066 PUTTY KNIFE W/5/8" PIN

  • Another emergency kit gadget that allows the placement of a 5/8" pin in many unusual locations. Because of its strength and its very thin profile the Putty Knife can be slipped behind a door molding, window sill molding, the top of a closed door, a baseboards, the backing on a bookcase, and so on, and so on....
MATTHEWS
429492

TVMP ADAPTER

  • Most TV lighting instruments have a hole in the yoke for the mounting of a C-Clamp. When one of these fixtures needs to be mounted on a stand, the TVMP Adapter makes this easy. With an external diameter to fit into a Junior receiver, and a 5/8' female bore for mounting on a Baby pin, the threaded 1/2'-13 top attaches right to the lamp yoke.
MATTHEWS
420100

MATTHELLINI 2" CENTER JAW CLAMP

  • Matthellini clamps are good for solid gripping of round, square or rectangular tubing.
MATTHEWS
420101

MATTHELLINI 3' CENTER JAW CLAMP

MATTHEWS
420101

MATTHELLINI 3" CENTER JAW CLAMP

MATTHEWS
420113

EXTENDELLINI

  • The Extendellini works with both the 2" and 3" Center Jaw Matthellini or Cardellini Clamps.  Show with Matthellini clamp.
MATTHEWS
429241

CHEATER ADAPTER

  • The Cheater Adapter 429241 has a 5/8' receiver with the Baby Pin set at an angle, to eliminate barn door interference.
MATTHEWS
429595

BAR CLAMP ADAPTER

  • Bar Clamp Adapters used for mounting small light fixtures.
MATTHEWS
209638

4 x 4 SNAP IN MOUNTING PLATE

  • A 4"x4" plate with mounting holes in each corner and a snap-in pin welded to it. Useful for mounting signs or small platforms with Super Mafer Clamps.
MATTHEWS
429621

RECEIVER MOUNTING PLATE

  • Often used as the foundation for a monitor platform, a speaker platform or for placing product. The plate has a 5/8" receiver for placing directly onto a Baby Stand. The place is provided with four screw holes.
MATTHEWS
429141

CHEATER PLATE WITH 3" PIN

  • Similar to the 3' Baby Plate with one big difference - the pin is mounted at an angle, which eliminates barn door interference when positioning a lighting fixture.
MATTHEWS
429085

BABY PLATE WITH 6" PIN

  • Baby Plates used for mounting baby fixtures
MATTHEWS
209632

PIN SNAP IN

  • Snap In Pins commonly used with Mafer Clamps